Temperature	90' C
Lifetime	Excellent
Wear Resistance	Excellent
Cracks Resistance	Very Good
Lateral Stability	Excellent

Structure	MultiLayer
Number of Layers	3
Internal Development	3962 mm
Thickness (mm)	50 to 75
External Hardness ('ShA)	37' +/- 3'
Colour	Offwhite

• Do not allow blanket surface to come in contact with floor, crates or equipment.
• Do not handle blanket with chains, cables, hooks or small diameter bars when installing, removing or crating.
• Do not apply steam to drum until water cooler lines have been turned on and blanket is moving.
• Do not increase tension on the blanket beyond the minimum required to eliminate slippage.
• Do not release blanket tension at shut down.
• When the machine is not in use, the blanket should not be kept in contact with hot surface.
• It is advisable to use minimum steam pressure in order to have better life of the rubber blanket excessive steam pressure reduces life of rubber blanket and increase necessity of frequency grinding.
• It is advisable to adjust pressure roll after each grinding.

• It is recommended that blanket be reground after every one million meters of cloth or every 120 hours operation. The rubber removed in grinding should be 0.5 to 1 mm. to get fresh lively surface. Grinding prolongs the life of the blanket by removing minor defects before these develop into serious ones under friction and excess heat should be avoided.
• Talcum or Soap stone powder should be used while grinding to avoid generation of heat.

• The rubber blanket should be carefully removed from its case and should be kept on edge in upright cylindrical form. If the blanket has been in the case for a considerable length of time, it may be necessary to use spool or large diameter pipe to obtain the circle or cylinder form.
• It maintain a high degree of specialization and supports its customer through the realization of high product and service objectives.

 

 

 

To obtain Shrinking, Handle modifications and fabrics texture treated on sanfor or comfit type machines.